4.20 T4500/T4600 FL Inverter Board
Removing the Monochrome LCD FL Inverter Board
To remove the Monochrome FL inverter board, follow the steps below and refer to Figure 4-42.
1. Turn off the power to the computer; disconnect the AC adapter, power cord and all external
cables connected to it.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top cover, display
assembly and display mask as described in Sections 4.2, 4.3, 4.4, 4.5, 4.9, and 4.13.
3. Remove the two M2.5x4 screws securing the FL inverter board.
4. Disconnect the FL inverter cable and FL cable from CN1 and CN2 on the FL inverter
board.
Figure 4-42 Removing the T4500/T4600 FL Inverter Board
4-43