Toshiba T4500 User Manual page 156

5. Disconnect the display cables from CN11 and CN12 on the LCD module (Figure 4-40).
Display cover
Installing the T4600C 9.5-inch TFT Color LCD
To install the T4600C's 9.5-inch TFT color LCD, follow the steps below and refer to Figures 4-39
and 4-40.
1. Connect the two display cables to CN11 and CN12 on the TFT color LCD module and
rotate the module into place (Figure 4-40).
2. Connect the two FL cables to CN2 and CN3 on the FL inverter board (Figure 4-39).
3. Align the 9.5-inch TFT color LCD and secure it with two M2.5x6 screws. Then secure the
four 2.5x10 screws (Figure 4-39).
CAUTION: If you're replacing the LCD cable or the LCD module, DO NOT forget to
secure the ground cable near the left side display hinge.
4. Replace the display mask, top cover and battery pack as described in Sections 4.13, 4.5, and
4.2.
Display cables
Figure 4-40 Disconnecting the Display Cables
4-41