Installing the Fluorescent Lamp
To install the T4500/T4600 fluorescent lamp, follow the steps below and refer to Figure 4-47.
1. Slip the edge of the plastic cover under the metal frame and align the holes in the cover
with the corresponding holes in the display assembly cover.
2. Secure the plastic cover with the three M1.5x3 brass flat-head screws.
3. Secure the FL cable to the LCD module with tape as shown in Figure 4-47.
4. Install the LCD module, FL inverter, display mask, display assembly, top cover, optional
PCMCIA card, optional memory card and battery pack as described in Sections 4.21, 4.20,
4.13, 4.9, 4.5, 4.4, 4.3 and 4.2.
4-49