4. To remove the pink and black display cables, remove the two M2.5x6 silver screws secur-
ing the display hinge (Figure 4-49).
5. Remove the one M2.5x4 screw (T4500/T4600) or one M2.5x6 screw (T4500C/T4600C)
securing the ground cable (Figure 4-49).
6. Remove the display hinge and lift off the display cable (Figure 4-49).
7. To remove the display sensor switch, remove the one M2x8 silver screw securing the
cable to the hinge (Figure 4-50).
Figure 4-50 Removing the Display Sensor Switch
Figure 4-49 Removing the Display Cables
T4500/T4600: M2.5x4 screw
T4500C/T4600C: M2.5x6 screw
4-51