Toshiba T4500 User Manual page 106

Press ESC if the setup options displayed accurately reflect your hardware configuration and no
changes are necessary.
The SETUP displays the following message:
Exit without saving? (Y/N)
Press Y. The system returns to the DIAGNOSTIC MENU.
3.22.3 Changing SETUP Values
You can change the setup options automatically or manually.
Automatic Reset
Follow these steps to set the values automatically:
1. At the SETUP MENU, Press Home. This instructs the program to reset all the options to
their factory preset values.
The program calculates how much base and extended memory your computer has, based on
whether or not you have an expansion memory card installed.
The SETUP menu displays the new values.
2. Confirm that the new values are correct. To change any option(s), go to the next item,
Manual Reset.
3. If the new values are correct, press End to record the new values in configuration memory.
4. Go to Step 5 of the next item, Manual Reset.
Manual Reset
Follow these steps to change any option(s) manually:
NOTE: The cursor, which is bar-shaped, indicates which option is presently selected.
1. Use the arrow keys to move the cursor between options. You can also select each option
group by pressing the character on the keyboard corresponding to the first character of the
heading for each option group. For example, if you press D, the cursor moves to the top of
the DISPLAY option group.
2. When the cursor highlights the values of an option you want to change, use the space bar
and backspace keys to select the desired value.
3. When you finish making changes, press End to record the new values in configuration
memory.
3-53