NOTE: Use extreme caution when handling the ball-point mouse connector and the speaker
as these parts are very delicate and can be damaged easily.
5. Remove the one M2.5x6 screw securing the ball-point mouse connector (Figure 4-15).
6. Lift out the ball-point mouse connector.
7. Lift out the speaker.
8. Disconnect the FDD flexible cable from PJ4 on the system board (Figure 4-15).
9. Disconnect the HDD flexible cable from PJ5 on the system board (Figure 4-15).
Figure 4-15 Removing the HDD
4-17