4.14 T4500C FL Inverter Board
Removing the T4500C FL Inverter Board
To remove the T4500C's FL inverter board, follow the steps below and refer to Figure 4-29.
1. Turn off the power to the computer; disconnect the AC adapter, power cord and all external
cables connected to it.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top cover, display
assembly and display mask as described in Sections 4.2, 4.3, 4.4, 4.5, 4.9, and 4.13.
3. Remove the three M2.5x6 screws securing the FL inverter board.
4. Carefully rotate the FL inverter board out from right to left and disconnect the FL inverter
cable from CN1 and the four FL cables from CN2, CN3, CN4 and CN5 (Figure 4-29).
Figure 4-29 Removing the T4500C FL Inverter Board
4-31