Docomo SH-05A Instruction Manual page 235

9
Select [Linked startup]/select the operation
performed after alarm/t.
10
Press i/i.
Setting timer for recording 1Seg programs
■
1
Select [Recording]/select the [Strt date]
select the [Start] field/enter the start date/enter a
time (24-hour format)/select the [End] field/enter
the end date/enter a time (24-hour format)/t.
: If [Recording] is selected, the confirmation screen stating that 1Seg
may not be recorded correctly depending on signal status appears.
Select [Yes(Always)] to subsequently not display the confirmation
screen for recording.
: To select a date from the calendar: In the Date settings screen, press
C/select a date with w/t.
2
Select the repeat method.
;
Select [Once only].
;
Select [Daily XX:XX]/[Weekly XX]/enter the number of
repeats/t.
• The saved time/day appears.
• 00 represents unlimited repeats.
3
Select the [Channel] field/t/select a channel/t.
4
Select the [Prog name] field/t/enter the program
name/t.
: Enter up to 200 single-byte (100 double-byte) characters.
5
Select the [Start ann] field/t.
6
Select [Alarm tone]/select an alarm tone/i.
: To check an alarm tone: Select an alarm tone/t.
: To not sound an alarm: Select [Alarm tone]/[Not set].
7
Select [Alarm volume]/adjust the volume with
t.
8
Press i/i.
Setting Wakeup TV
Set date/time and a channel and use 1Seg as alarm clock.
At a set start time, 1Seg is activated automatically.
For Wakeup TV, the off timer of [After 30 min] is automatically set.
<Recording>
The reception status of 1Seg may become bad when the FOMA terminal
field/t/
is closed. Use 1Seg with the FOMA terminal opened.
1
In the Custom menu, select [LifeKit]/[Wakeup TV].
: For details on the following operations nstep 1 of "Setting timer for
starting 1Seg programs" on P. 232
: If start announcement is set to [OFF] or the linked startup settings
are changed, Wakeup TV is not activated.
To edit or delete Wakeup TV, use Timer list in the 1Seg menu in the
same way as when setting a timer for starting or recording a program.
When start time arrives
An alarm, which set in start announcement, is activated approximately 1
minute before the set alarm time (for Reception) or the start time (for
Recording). After approximately 15 seconds, the alarm stops. When
watching 1Seg in the horizontal display, the horizontal display is switched to
the vertical display.
When the FOMA terminal is closed, [Reception alarm]/[Video rec alarm]
appears on the sub display.
For details on the priority of alarm functions nP. 363
For details on stopping the alarm or adjusting the volume nP. 364
Operation after Reception reserve alarm
Terminal status
Normal [ON (Notify)]
(Linked
startup
[ON (Do not notify)] 1Seg start
setting)
u/
[OFF]
While watching 1Seg
<Wakeup TV>
Operation after alarm
1Seg start confirmation screen appears/
[Yes]/1Seg start
*
Nothing is performed (1Seg is not started)
Nothing is performed (continue watching
1Seg)
Continued on next page
233