Switching A Voice/Videophone Call During A Call - Docomo SH-05A Instruction Manual

• [Unavailable]: When the caller cannot send a caller ID, such as
when the call is received from overseas or ordinary (landline)
telephones via various transfer services (However, a caller ID may
still appear depending on the company)
Operation while receiving a call
: To change the ring volume: Press o/p.
: On hold (nP. 65)
: Quick message (nP. 70)
: Quick silent (nP. 91)
: Manner mode set/disable (nP. 91)
2
Press s.
: For voice calls, calls can be received with Any key answer
(nP. 65).
: To answer with a substitute image (Videophone): Press i.
3
Press H to end the call.
For a Videophone call, when images are not received from the other
party, a black screen appears.
While Multi Number is used, a Multi Number name appears to the right
of [Calling]/[Incoming videophone] if a call is received from a saved
Multi Number.
The ring volume is changed for that incoming call only.
When the handset beeps during a call indicating an incoming call
When any of services such as Voice Mail, Call Waiting, or Call
Forwarding is subscribed to and Set arrival act is set to "Activate" while
Arrival call act is set to [Answer], the following services can be used
when the handset beeps during a call (When another Videophone call
is received during a voice call or another call is received during a
Videophone call, the notification screen appears and a service to be
used can be selected. Call Waiting is not available).
Voice Mail Service (nP. 390)
Call Waiting (nP. 391)
Call Forwarding Service (nP. 392)
Submenu operations for incoming voice calls screen
■
[Record message]
[Forward calls]
64
[Auto forward]
[Call Rejection]
Submenu operations for incoming Videophone calls
■
screen
Refer to submenu operations for incoming voice calls screen (nP. 64)
for the following functions.
Call Rejection
[Record message]
Switching a voice/Videophone call
during a call
The caller (other party) selects to switch between a voice call and
a Videophone.
The call recipient cannot switch (Available with models that support
switching between a voice call and a Videophone).
The Notify switch mode (nP. 74) must be set to "Activate" for the
recipient's FOMA terminal.
1
The caller switches between a Videophone and a
voice call during a call.
Switching from a voice call to a Videophone
: Switching takes approximately 5 seconds. Switching may take more
time depending on the signal status. [Please wait for a while] appears
nP. 70
and a guidance message is played.
Forward calls Auto forward
nP. 70