Complex kanji is changed in part or is excluded.
Converting multiple hiragana by one-touch
operation
<One-touch Conv>
From all the hiragana combinations assigned to each pressed key,
conversion candidates appear.
One-touch conversion works best with nouns.
Example: When entering おはよう
1
In the text input screen, press
1681.
: To enter dakuten/handakuten: Press *.
Example: When entering 会議, press
212*.
: Alternatively, press the same key repeatedly
when the combined characters belong to the
same row.
Example: When entering 企画, press
2r2r2 (かかか) or
222 (く).
2
Press o to move the cursor to the
conversion candidates field.
3
Select おはよう/t.
Predictive headword conversion
In One-touch conversion, words that start with the characters assigned
to the pressed key (words starting with あ, い, う, え, お when あ is
entered) appear according to the time of day. Words shown are already
registered and grouped into the following times: 5:00 to 10:59, 11:00 to
16:59, 17:00 to 22:59, and 23:00 to 4:59.
Editing text
Adding characters
■
1
Move the cursor to the location to add characters.
2
Enter characters/t.
■
Deleting one character
1
In the text input screen, press c.
: The character to the right of the cursor is deleted. If the cursor is at
the end of the message, the character to the left of the cursor is
deleted.
: When the cursor is on a character, the character at the location is
deleted.
Deleting characters collectively
■
1
In the text input screen, press c (for 1+ seconds).
: When characters are after the cursor, all characters at and after the
cursor are deleted.
: If the cursor is at the end of the message, all characters before the
cursor are deleted.
Using preset phrases
Enter preset phrases, original phrases (nP. 384) and mail addresses
easily.
1
In the text input screen, press C/[Phrase(Hold-)].
: Alternatively, press a (for 1+ seconds).
: To switch between Show by category and Show all: Press i.
2
Select a phrase/t/confirm the phrase/t.
<Phrase(Hold-)>
383
Need help?
Do you have a question about the SH-05A and is the answer not in the manual?