Docomo SH-05A Instruction Manual page 390

3
Speak to the mouthpiece, "おはよう"/t.
: Speak with adjusting the volume so that the Microphone volume bar
slightly crosses over the center.
: Finish speaking within approximately 30 seconds. After speaking is
finished or approximately 30 seconds passes, the voice input
automatically ends.
: After the voice input ends, the vibrator is activated and the
communication with Voice Input Mail server is started. Voice is
converted into characters.
: To cancel the voice input: Press i.
4
Check the converted character.
: To change the range of character to convert:
Press v.
• At the position other than the beginning/end
of the sentence, press t to move to the
next range.
: To edit the converted character: Select a
character to edit and press p/m/select a
conversion candidate/t.
• Editing manually entered character is not
available. Delete once and enter again.
• To re-select a character to be edited: Press
m in the conversion candidate field.
: To insert a character manually: Select the position to insert and press
i/enter a character/t.
: To delete a character: Select a character to delete and press c.
• Characters cannot be deleted collectively.
: To retry the voice input: Press C/[Yes].
388
5
At the beginning/end of the sentence, press t.
: Complete the character conversion and confirm the texts input with
6
Microphone volume bar
Select [Edit with button].
: The message input screen reappears.
: To continue entering characters with the voice input: Select [Voice
In the following cases, voice may not be recognized properly.
When the subject and message of mail are entered, names registered
to the phonebook or User dictionary are prioritized as candidates.
voice input.
input].
When voice is too loud
When surrounding noise is loud
When pronunciation is not clear
When pronunciation is unnatural or too fast
When a key is pressed or the mouthpiece is touched