Docomo SH-05A Instruction Manual page 5

This is the function
name as it appears in
the index.
The outline of each
Activate an alarm tone, LED, or vibrator at the specified time/day
function and additional
of week.
information are
explained.
The operation is
detailed in steps.
2
3
Additional information,
4
precautions, and advice
relating to operations
are explained.
5
6
Search by chapter from
the index.
Each operation is
8
explained when the
operations are different
depending on the
362
selected items.
Page number
Alarm
Ringing alarm at specified time
Save up to nine alarms.
Set the correct date and time in advance ( P. 49).
For details on setting the LED P. 100
For details on setting the vibrator P. 89
Saving alarms
1 In the Custom menu, select [LifeKit] [Alarm].
Select a number to save .
Select [Enter Time] enter a time (24-hour format)
.
Select [Set repeat] select the repeat method
: Set day of week: Select [Set day of week]
select day of week
.
• If [Exclude holidays] is selected, an alarm is not activated on the
dates set for vacations or holidays in Schedule.
Select [Message] enter a message .
: Enter up to 60 single-byte (30 double-byte) characters.
Select [Contacts] select the entry method.
;
Select [Search phonebook] select a name .
;
Select [Direct input] enter a phone number .
7 Select [Alarm tone] select an alarm tone .
: To check an alarm tone: Select an alarm tone
.
: To not sound an alarm: Select [Alarm tone]
[Not set].
Select [Alarm volume] adjust the volume with
.
※ Content differs from actual pages in this manual.
9 Select [Snooze setting] [ON] enter the interval
enter the number of times to ring alarm
: Set the alarm's interval and the number of times to ring the alarm.
10 Select [Ring duration] enter the ring duration
11 Press .
Contacts cannot be saved while Keypad dial lock is set.
When multiple alarms are set to the same time, they are prioritized in
the following order.
Priority (high b low)
Alarm function Recording b Reception b Alarm b Schedule
• If the timers for starting and recording 1Seg programs are set for the
same time, Reception reserve alarm is not activated.
Setting alarm from stand-by
<Quick alarm>
1 In stand-by, enter a time (four digits: 24-hour
.
format) [Quick alarm].
Schedule is registered for the current day (following day if the time has
already passed) (All day: [OFF]), [Plans] for the subject and the icon,
and [Quick alarm] for the detail.
Setting details screen layout
1234
5
1 Alarm set icon
2 Time
3 Repeat frequency
Once only Set day of week
.
.
Necessary information,
precautions and other
information for using
functions are explained.
The explanations of
screen display are
shown. Refer to the
screens while using the
FOMA terminal (Text
which is input, numbers
and settings are
Daily examples).
3