Docomo SH-05A Instruction Manual page 401

Switching modes
<Mode switching>
1
In the Custom menu, select [Settings]/[NW
Services]/[2in1 setting].
2
Enter the terminal security code/t.
3
Select [Mode switching]/select the mode/t.
Selecting a phone number to call and making a call when
■
Dual mode is set
<Select 2in1>
1
In stand-by, enter a phone number/C/[Select
2in1].
2
Select a phone number to call/t/s (Phone)/i
(V.phone).
Switching a sender's address and sending a message
■
when Dual mode is set
<Change sender address(A•B)>
1
In the compose message screen, press C/[Change
sender address(A•B)].
2
Select a sender's address/t/i.
When 2in1 mode is set to [Dual mode], if sender's address is Address
B, [a] is displayed on the upper left of the compose message screen.
Setting mode to be registered in phonebook
<Phonebook 2in1 set>
Available phonebook is automatically switched depending on the 2in1
mode. In the 2in1 mode when entries are saved to a phonebook, the
Phonebook 2in1 set is saved and can be changed in the following way.
1
In the Custom menu, select [Settings]/[NW
Services]/[2in1 setting].
2
Enter the terminal security code/t/[Phonebook
2in1 set].
3
Select the setting method.
;
Select [Selection setting]/select a name/t/C.
;
Select [Collective grp set]/select a group/t.
;
Select [Set to all].
4
Select the setting to register/t.
When saving to FOMA card phonebook, the mode is set to [Common]
and cannot be changed even if saving with any modes.
Setting stand-by display for each mode
<Stand-by display>
Set the stand-by displays of [Dual mode] and [B mode].
1
In the Custom menu, select [Settings]/[NW
Services]/[2in1 setting].
2
Enter the terminal security code/t/[Stand-by
display].
3
Select an item/t/[Settings].
4
Select an image/i/[Yes].
Use JPEG/GIF images, animated GIF, and Flash movies in My picture
of Data box. i-motion and i-appli are not available.
Even if i-appli stand-by is set when the 2in1 mode is set to [B mode] or
[Dual mode], it cannot be set to the stand-by display of [B mode] or
[Dual mode]. It is set to the stand-by display of [A mode].
399