Viewing Map - Docomo SH-05A Instruction Manual

Setting Positioning mode for positioning
location
<Positioning mode>
This setting is valid only when the positioning is performed in Japan.
1
In the Custom menu, select
[Set position loc.]/[Positioning mode].
2
Select the Positioning mode/t/[OK].
: When [Quality mode] is selected, the positioning is performed with
longer time. As a result, more accurate positioning is performed than
in the Standard mode.
Map

Viewing Map

Activate GPS compatible i-appli and view the present location or
specified location.
Make the Map setting in advance, and set GPS compatible i-appli to
activate.
By default, the FOMA terminal is set to activate "Map Application". For
details on operating "Map Application" nP. 297
1
In the Custom menu, select
[Map].
: GPS compatible i-appli is activated after positioning the present
location.
Setting map
<Map setting>
Setting i-appli to activate as a map
■
Set GPS compatible i-appli to activate when selecting Map in the Map/GPS
menu or [Read Map] from the location information of each function.
1
In the Custom menu, select
[Map setting]/[Select Map].
2
Select the GPS compatible i-appli/t.
296
[LifeKit]/[Map/GPS]/
[LifeKit]/[Map/GPS]/
<Select Map>
[LifeKit]/[Map/GPS]/
Setting whether to position present location when
■
activating a map
<Map activate setting>
Set whether to position the present location when Map in the Map/GPS
menu is selected and GPS compatible i-appli is activated.
1
In the Custom menu, select
[Map]/[Map activate setting].
2
Select the setting/t.
Using GPS compatible i-appli
Start i-appli compatible with Map/GPS function.
When GPS compatible i-appli is used, location information is sent to the
information provider of the software used.
When GPS function is used on GPS compatible i-appli, set Location
usage setting of the software used to [Send].
1
In the Custom menu, select
[Map/GPS appli].
2
Select software/t.
Starting GPS compatible i-appli by one-touch
operation
1
In stand-by, press y.
: GPS compatible i-appli is started according to Select Map. By
default, the FOMA terminal is set to activate "Map Application".
[LifeKit]/[Map/GPS]/
[LifeKit]/[Map/GPS]/