Docomo SH-05A Instruction Manual page 477

2
Select [Enable]/[Yes]/[Scan
[Yes].
: When Scan function is set to [Enable] and malicious data is detected,
security warning appears in five levels (nP. 476).
Updating pattern definitions
1
In the Custom menu, select [Settings]/[General
settings]/[Scanning function]/[Update]/[Yes].
: To not send the terminal ID, select [No].
2
Select [Yes].
: Downloading starts.
: When updating is not necessary, [Pattern definitions are up-to-date]
appears. Select [Agree] and resume operations.
3
Press t when updating is completed.
When updating pattern definitions, information about the FOMA
terminal (model, serial number, etc.) is automatically sent to the server
(DOCOMO scan function server). Sent information is only used for
pattern definition update.
Correctly set the FOMA terminal date (year/month/day) beforehand.
Download may be interrupted if signal is weak.
message]/[Enable]/
<Update>
Updating pattern definitions automatically
<Set auto-update>
Set auto-update to [Enable] to automatically update pattern definitions when
a new version becomes available.
When auto-update is successful, a message stating so appears.
Auto-update is not performed depending on the status of the FOMA
terminal. In such cases, a message stating that pattern definitions have
been updated appears.
1
In the Custom menu, select
[Settings]/[General settings]/
[Scanning function]/[Set
auto-update]/[Enable].
2
Select [Yes]/[Yes]/[Agree].
Information regarding Enable/Disable for Set auto-update is saved on
the network. Therefore, [Enable] is always selected on the FOMA
terminal when setting.
When setting auto-update, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server
(DOCOMO scan function server). Sent information is only used for
pattern definition update.
Set auto-update may be interrupted if signal is weak.
Displaying scanned results
When data that can cause malfunctions are detected, a warning screen
appears.
475