Docomo SH-05A Instruction Manual page 302

Start: 09:00 End: 09:00
Setting details
Repeat Valid period
Not set –
Everyday From 08/16/2009
End date 09/16/2009
From 08/06/2009
End date 09/16/2009
Not set
Set day of From 08/16/2009
week End date 09/16/2009
From 08/06/2009
End date 09/16/2009
Not set
Setting host
<Host setting>
Set the host for the GPS service setting site.
※ Setting does not normally need to be changed.
1
In the Custom menu, select
[Loc. request menu]/[Host setting].
2
Enter the terminal security code/t.
3
Select [User specified host]/C.
: To return to the default host: Select [Default].
: To change to the preset user-defined host: Select [User specified
host].
: To delete the set user-defined host: Select [User specified
C/C/[Yes].
300
Schedule when location provision is
performed
08/11/2009, 14:00 to 08/12/2009, 09:00
Everyday from 08/16/2009, 09:00 to 09/
17/2009, 09:00 (between 09:00 and
09:00 on the next day)
Everyday from 08/11/2009, 14:00 to 09/
17/2009, 09:00 (between 09:00 and
09:00 on the next day)
Everyday after 08/11/2009, 14:00
(between 09:00 and 09:00 on the next
day)
Set day of week from 08/16/2009, 09:00
to 09/17/2009, 09:00 (between 09:00
and 09:00 on the next day)
Set day of week from 08/11/2009, 14:00
to 09/17/2009, 09:00 (between 09:00
and 09:00 on the next day)
Set day of week after 08/11/2009, 14:00
(between 09:00 and 09:00 on the next
day)
[LifeKit]/[Map/GPS]/
host]/
4
Select [Host name]/enter the host name/t.
: Enter up to 99 single-byte alphanumeric characters and symbols.
5
Select [Host URL]/enter the host URL/t.
: Enter up to 100 single-byte alphanumeric characters and symbols.
6
Press i.
GPS service settings
Configure the setting required for Location provision.
1
In the Custom menu, select
[Loc. request menu]/[Service settings].
: Connected to the GPS service setting site.
2
Configure the settings.
: Please contact GPS information providers for the setting details.
When location information is requested
Location provision starts when the request to provide the location
information is received.
When each service usage setting is set to [許可], the location information
is automatically provided upon request.
When each service usage setting is set to [毎回確認], a confirmation
screen asking whether to provide appears at every request. Select [Yes]
to start providing the location information.
If no operation is performed when the location is requested, return to
stand-by display after providing location information is end, and the stock
icon [@] (Send loc - Resp/Send loc - No resp/Send loc - Failed) appears.
Select the stock icon and location histories appear.
To cancel Location provision, press i and press t. However, the
location information may be sent depending on timing.
Sent location information may not reach a requestor of the location
information depending on the signal strength.
Host ID for Location provision may not be displayed on the screen.
<Service settings>
[LifeKit]/[Map/GPS]/