Docomo SH-05A Instruction Manual page 478

Displaying scanned results
■
Level 0
Level 1
Level 2
Level 3
476
Displaying, activating, or calling
is available. Appears when
there was an error previously,
but there is no error presently.
Select [Agree] to display,
activate, or call.
Select [No] to display, activate,
or call.
Select [Yes] to cancel the
operation.
Displaying, activating, or calling
is not available. Select [Agree]
to end.
Displaying, activating, or calling
is not available. Select [Yes]
and select [Yes] in the delete
confirmation screen to delete
the data. Select [No] to end
without deleting.
Level 4
Warning screens other than the above may appear depending on the
contents of pattern definitions.
■ Displaying detected errors
In the warning screen, select [Detail] to show error
names. When no error name exists for the
contents of the pattern data, [Detail] does not
appear.
Up to five error names appear. [Etc] appears
below the fifth error name when six or more are
detected. If same error is detected more than once, it is only listed once.
Checking version of pattern definitions
1
In the Custom menu, select
[Settings]/[General settings]/
[Scanning function]/[Version].
Displaying, activating, or calling
is not available. Select [Agree]
to delete the data.
<Version>