Setting An Image To Send - Docomo SH-05A Instruction Manual

Switching between Full-action and Part-action
<Change action>
1
While sending Chara-den as a substitute image, press
C/[Chara-den set]/[Change action].
: Alternatively, press o (for 1+ seconds).
: Modes are switched between Full-action and Part-action.
Making Chara-den perform actions
Alternatively, enter the action number by pressing 1 to 9 to have the
character perform an action.
When the DTMF mode is set to [ON], the Chara-den key operations
become unavailable because of the touch-tone signals sent with the dial
keys.
Perform different actions together in the Part-action mode.
Some Chara-den do not perform actions and others perform actions
without operation.
1
While sending Chara-den as a
substitute image, press
[Chara-den set]/[Action list].
: Alternatively, press m or p (for 1+ seconds).
2
Select an action/t.
: To end the action: Press 0.
: To display details: Select an action/i.

Setting an image to send

The following images can be sent during a Videophone call.
Use JPEG or GIF images saved in My picture of Data box that are set to
QCIF: 176×144. However, animated GIFs are not available.
Still pictures that are restricted for output from the FOMA terminal are not
available. Still pictures shot with the FOMA terminal are available
regardless of the File restriction (Picture memo is not available).
<Action list>
C/
Changing an image to send during a call
<Change send img>
Change the image to send during a Videophone call.
Images set by Change send img are disabled when a Videophone ends.
1
During a Videophone call, press C/[Change send
img].
: Press i during a Videophone call to switch between a substitute
image and My side.
2
Select the image to send.
;
Select [My side] (to switch to a camera image).
;
Select [Substitute image]/select a still picture/i.
;
Select [Chara-den]/select Chara-den/i.
;
Select [File playback]/select a still picture/i.
Still pictures saved onto a microSD Card cannot be used directly. Copy
to the FOMA terminal handset in advance.
Pausing your camera image to send an image
<Pause>
1
While sending a camera image, press C/[Change
send img]/[Self-portrait]/[Pause].
: To disable Pause: Press i/c.
A paused camera image can be sent.
While pausing, your image is sent to the other party with [Stopped]
superimposed.
When a Videophone call ends, the setting is reset.
71