Sending and receiving data
Terminal security code and authentication password entry are required
for sending or receiving all data items. The authentication password is a
password exclusively for iC communication. Before starting data transfer,
the sender and receiver must enter the same user-specified four-digit
password.
Sending data
<Send/Send all>
Example: Phonebook
1
In stand-by, press a.
2
Select a name/C/[Send data]/[iC transmission].
3
Select the sending method.
;
Select [Send].
;
Select [Send all]/enter the terminal security code/t/enter
the authentication password/t.
4
Select [Yes].
5
Place the b mark on that of the other party's FOMA
terminal.
Receiving data
<Receive/Receive all>
1
In stand-by, place the b mark on that of the other
party's FOMA terminal.
2
Select [Yes].
: When receiving all data items: Select [Yes]/enter the terminal
security code/t/enter the same authentication password
entered on the sender's FOMA terminal/t/[Yes].
• To cancel Receive: While receiving data, press C.
Voice recorder
Using the FOMA terminal as voice
recorder
Use the FOMA terminal as a voice recorder (microSD Card is
required).
Save up to 1,000 recordings on the [Multimedia] folder of microSD Card
as [Voice only] (no image) i-motion (Actual number varies depending on
recording time). Record up to 6 hours per recording.
When recording is attempted after the 1,000th recording, the message
stating that recording is failed appears and Voice recorder ends.
Record up to approximately 7.7 hours when saving to a 64 MB microSD
Card.
Recording within a distance of approximately 1.5 m is recommended.
Play recorded voice with i-motion player (nP. 317).
Recording
Recording start sound is heard and recording starts. Picture Light flashes
during recording.
1
In the Custom menu, select
[LifeKit]/[Voice recorder]/t.
: To pause/play: Press i.
2
Press t to end recording.
: Recording stops automatically in the following cases.
When the remaining time goes to 00:00:00
When recording time reaches approximately 6 hours
When microSD Card has no available space
3
Select [Save].
: Recorded voice is saved.
: To play a recorded voice: Select [Play].
Voice recorder
screen
Continued on next page
351
Need help?
Do you have a question about the SH-05A and is the answer not in the manual?