Notifying The Other Party Of Your Phone Number; Checking Your Own Phone Number - Docomo SH-05A Instruction Manual

When time difference is adjusted overseas, the local time and date and
[!] appear in Redial, Received calls, Received/Sent messages history
(SMS only), received/sent mails list and location history list. The
received/sent mails are not displayed in order of the displayed time and
date but the mail reception/send.
[!] does not appear in the Unsent messages for mail messages. If the
date order display is set for the Unsent messages, unsent mails are
displayed in the order of the displayed time and date.
Time correction may not be performed depending on the overseas
telecommunications carriers' network. Change the time zone manually.
During overseas use, Japan time and local time (or time set in City)
appear in the dual display except for the following cases.
When Auto time correction is set to [ON] and time correction
information is not being received from an overseas
telecommunications carriers' network
When Auto time correction is set to [OFF] and City is set to the city in
the same time zone as Japan
■ Changing time zone manually
1
In the Date settings screen, select the [Auto time
correction] field/t/[OFF]/C.
2
Select a time zone/t.
3
Select a city/t/i.
Notify caller ID
Notifying the other party of your phone
number
Display your number (caller ID) on the other party's phone
(display) when making a voice/Videophone call.
Handset number (caller ID) is important personal information. Be very
careful about your caller ID setting.
The Notify caller ID function is available only on compatible phone
devices.
50
<City>
Setting Notify caller ID/No caller ID in advance
1
In the Custom menu, select [Settings]/[NW
Services]/[Notify caller ID].
2
Select [Activate/Deactivate].
: To check the setting: Select [Check setting].
3
Select the setting.
: To notify caller ID: Select [Yes].
: To not notify caller ID: Select [No].
Notify caller ID setting cannot be set from outside the service area.
Own number

Checking your own phone number

When checking your own phone number during a call nP. 54
1
In the Custom menu, press 0.
: Alternatively, select [Phone]/[Own number] (or
[General settings]/[Check status]/[Own number]).
: To switch between Number A and Number B (when 2in1 [Dual mode]
is used): Press i.
When changing the Number B of 2in1, use any of the following methods
to obtain the correct Number B.
Set 2in1 function OFF and then perform 2in1 setting again to set
2in1 function ON
Check the 2in1 subscription
When a FOMA card exchange (2in1 subscriber b 2in1 nonsubscriber)
is performed, set 2in1 function OFF.
When a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is
performed, check the 2in1 subscription.
For details on Owner information nP. 372
[Settings]/