Flow Of Setup For Data Transfer (Obex Communication); Flow Of Setup For Data Communication - Docomo SH-05A Instruction Manual

For Windows Vista
In the [スタート] (Start) menu of Windows, specify
[<CD-ROM drivename>: index.html] in the [検索の開
始] (Start search) field and click [index.html] displayed
in the search result field.
For Windows XP and Windows 2000
In the [スタート] (Start) menu of Windows, click [ファ
イル名を指定して実行] (Run), specify [<CD-ROM
drivename>: index.html] and click [OK].
The operation in an upgraded OS cannot be guaranteed.
Depending on the operating environment, the use of
the software may not be possible. DOCOMO holds no
responsibility for responding to inquiries or
guaranteeing operation in environments other than
those specified above.
The warning message may appear when a CD-ROM
is set in a PC. This warning is shown by the security
setting of Internet Explorer but does not cause any
problem for use.
Click [はい] (Yes).
Required equipment
The following hardware and software are required
besides the FOMA terminal and a PC.
FOMA USB Cable with Charge Function 02 (sold
separately) or FOMA USB Cable (sold separately)
CD-ROM "SH-05A CD-ROM" (accessory)
Use a dedicated USB cable "FOMA USB Cable with
Charge Function 02" or "FOMA USB Cable". USB
cables for PC are not available since the connector
shape is different.
The use of a USB HUB may not work correctly.
Flow of setup for data transfer
(OBEX ™ communication)
FOMA USB Cable with Charge Function 02
(sold separately) is required to install the
FOMA communication configuration file.
Download and install the FOMA communication
configuration file
Install from the accompanying CD-ROM (nP. 4)
Download from the DOCOMO website and install
Data transfer
Flow of setup for data
communication
This section describes the preparation
required to connect the FOMA terminal to
your PC, and use a packet transmission and
64K data communication. The flow is as
shown below.
Download and install the FOMA communication
configuration file
Install from the accompanying CD-ROM (nP. 4)
Download from the DOCOMO website and install
Connect up PC to the FOMA terminal using FOMA
USB Cable with Charge Function 02 (sold separately)
Confirm installation (nP. 5)
Install DOCOMO
Connection Manager
(nP. 8)
Set data communication
with DOCOMO
Connection Manager
Connect (nP. 9)
* Refer to "DOCOMO Connection Manager operation
manual.pdf" for details on setting DOCOMO
Connection Manager.
Use "mopera U" (subscription necessary) for the
broadband Internet connection, etc. There is a plan
that only charges for months which the service was
used.
3
(nP. 4)
Set up a communication
without using DOCOMO
Connection Manager
Packet transmission
(nP. 10)
64K data communication
(nP. 10)
*
Connect (nP. 19)