Setting Date And Time - Docomo SH-05A Instruction Manual

Date and time settings
Key sound
Set all font size
When items that have not been set remain, the setting screen appears
every time the power is turned on.
Alternatively, select [Settings]/[Initial setting] in the Custom menu to
display the setting screen.
1
Set the date and time (nP. 49).
2
Register a terminal security code (nP. 107).
3
Set the Key sound (nP. 88).
4
Set GPS Location provision ON/OFF (nP. 298).
5
Set the font size collectively (nP. 103).
: When the initial settings are complete, the software update function
confirmation screen appears. Read the description and select
[Agree] (When the initial settings are made from the menu or the
software update is set to other than [auto-update], the confirmation
screen does not appear).
Press H to cancel the initial settings.
Date settings

Setting date and time

Set the date and time on the FOMA terminal.
1
In the Custom menu, select
[Settings]/[General settings]/[Date
settings].
2
Select the [Auto time correction] field/t/select the
setting.
;
Select [ON]/i.
Change terminal security code
Location request menu
;
Select [OFF]/select the [Date] field/t/enter the
select the [Time] field/t/enter the time (24-hour
t/i.
• When entering month, day and time, add 0 before numbers one
through nine (example: 01, 02, 03, etc.).
• Set the date and time from 00:00 January 1, 2001 to 23:59
December 31, 2050.
When Limit settings is set to [Enable], the terminal security code must
be entered in the Date settings.
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for approximately 30
seconds or more, the settings are reset. Also, if the battery remains
empty, the settings may be reset. When this happens, set again after
charging the battery.
If the date and time are not set correctly, the following functions cannot
be used properly.
Redial, Received calls
Alarm
SSL/TLS (authentication)
Starting i-appli DX
Machi-chara
Pattern definitions update
Record message (voice), Record message (Videophone calls)
Camera image titles/shooting date
Playback of i-motion or music data with expiration date/period for
replay
View of e-books/e-dictionaries/e-comics with expiration date/period
for browse
When [Auto time correction] is set to [ON]
When the power is turned on, the FOMA terminal adjusts the time by
connecting to the network's time information.
If the FOMA terminal does not adjust the time even when the power is
turned on, turn off the power and restart.
Time may not be adjusted depending on the signal status.
Time may be off by a few seconds.
date/t/
format)/
Auto power ON/OFF
Schedule
i-appli Auto start
Reception, Recording
Software update
Continued on next page
49