Saving I-Mode Mail Then, Sending Later; When I-Mode Mail Is Received - Docomo SH-05A Instruction Manual

Save i-mode mail

Saving i-mode mail then, sending later

Saving i-mode mail
1
In the compose message screen, press C/[Save].
: Saved in Unsent messages.
Sending mail automatically in service area
When mail cannot be sent outside the service area, that mail is sent
automatically after returning to the service area.
Make up to 30 send reservations. Mail with a send reservation is saved in
[Drafts].
When the mail is automatically sent, the stock icon [5] (new auto send
result) appears, and the auto send result can be checked.
The mail, which is not automatically sent, is save in Unsent messages,
and [;] appears in the upper part of the display.
When the 2in1 is used, mail with a send reservation is automatically sent
regardless of the mode. The send result appears as follows.
For [A mode]: Results of mails of Address A
For [B mode]: Results of mails of Address B
For [Dual mode]: Results of all mails
1
In the compose message screen, press C/[Send
reservation].
Editing and sending saved i-mode mail
1
In the unsent mail list screen, select mail/t/edit
mail/i.
132
Auto receive

When i-mode mail is received

The following icons appear when mail is received.
Meaning of icons
U
Unread i-mode mail
(green)
h
Unread i-mode mail and SMS
Received i-mode mail and SMS in the FOMA terminal
H
are full
U
Received i-mode mail and SMS in the FOMA terminal,
SMS in FOMA card are full
(red)
U
Unread i-mode mail, SMS and Message R/F (during
i-mode/Full Browser)
(blue)
[
Unread SMS
(red font)
[
SMS in FOMA card is full
(blue font)
v
Unread Area Mail
W
Mail is at i-mode center
X
i-mode center is full
Among Mail, Message R, and Message F, more than two
L
types of them are at i-mode center
Among Mail, Message R, and Message F, more than two
K
types of them are at i-mode center and some are full at
i-mode center
• [W], [X], [K], and [L] may not appear even when mail is held at the
i-mode center.
• [W], [X], [K], and [L] do not appear when Receive option setting is
set to [ON].