Docomo SH-05A Instruction Manual page 528

4
Select [FOMA SH05A] from [接続方
法] (Connection method), enter a
temporary number in the [電話番号]
(Phone number) field that does not
actually exist (such as [0]), and click
[OK].
: For the area code, the default setting in
Windows (such as [03]), appears. Set any
number for the area code, since it is not related
to the host (APN) setting.
5
When the connection screen
appears, click [キャンセル] (Cancel).
6
Enter host (APN) and press o.
: Enter host (APN) in the format:
AT+CGDCONT=<cid>, "<PDP_type>","APN"
(nP. 25).
<cid> : Enter any of 2 or 4 to 10.
"<PDP_type>" : Enter "PPP" or "IP".
"APN" : Enter the host (APN) enclosed
in " ".
: If [OK] appears, the APN is set successfully.
: To check the current host (APN) setting, enter
AT+CGDCONT?o, and the settings appear in
a list.
When nothing appears on the screen
when AT commands are entered
: ATE1o
Refer to P. 28 for details on AT commands.
When resetting APN settings using
AT commands
: AT+CGDCONT=o:
: AT+CGDCONT=<cid>o:To reset only specific
When reset, <cid>=1 returns to mopera.ne.jp
(default setting), <cid>=3 returns to mopera.net
(default setting) and settings for <cid>=2 or 4 to 10
are unregistered.
When confirming APN settings using
AT commands
: AT+CGDCONT?o
Refer to P. 25 for details on AT commands.
7
Confirm that [OK] appears and
select [ハイパーターミナルの終了]
(Exit hyper terminal) from the [ファ
イル] (File) menu.
: Hyper terminal ends.
: [セッション×××を保存しますか？ ] (Save
session xxx?) appears. However there is no
need to save.
11
To reset all the cids
cids