Using Multi Number; Setting Remote Control - Docomo SH-05A Instruction Manual

Set arrival act
Activating/Deactivating arrival actions
Set arrival actions to "Activate" to receive another call according
to Arrival call action (nP. 396) during a call or 64K data
communication.
Using a service
1
In the Custom menu, select [Settings]/[NW
Services]/[In-call arrival act]/[Set arrival act].
2
Select the service.
;
Select [Activate]/[Yes].
;
Select [Deactivate]/[Yes].
;
Select [Check setting].
Remote Control

Setting remote control

Set "Voice Mail Service" or "Call Forwarding Service" remotely
from touch-tone landline phones, payphones and DOCOMO
mobile phones.
Remote Control is also available from outside the FOMA service area.
To perform remote operations, set Remote Control to "Activate".
To use network service overseas, set Remote Control to "Activate" in
advance.
Using a service
1
In the Custom menu, select [Settings]/[Other NW
Services]/[Remote Control].
2
Select the service.
;
Select [Activate]/[Yes].
;
Select [Deactivate]/[Yes].
;
Select [Check setting].
■ Accessing network services from other phones
For details on operating Network services from a payphone and others,
refer to "Mobile Phone User's Guide [Network Services]".
Multi Number

Using Multi Number

Multi Number is a service for using up to two phone numbers,
Additional Number1 and Additional Number2, besides Basic
Number on the FOMA terminal.
Multi Number settings (name, phone number, etc.) registered in the
FOMA terminal may be deleted when a FOMA card is removed or
replaced. In such cases, register again.
A registered name appears according to each Multi Number (Basic
Number/Additional Number1/Additional Number2) on the screen when a
call is being made/received.
When making a call from Redial or Received calls, the previously used
Multi Number is displayed and dialed.
The registered name appears in the Multi Number selection screen when
calling or the incoming call screen.
397