Setting An Alarm Tone For Reconnecting; Reducing Surrounding Noise To Make Voice Clear; Talking Hands-Free While Driving; Receiving A Voice/Videophone Call - Docomo SH-05A Instruction Manual

b
If is entered at the beginning of a phone number or after 186, 184 or a
b
prefix, the numbers after are recognized as the phone number.
Reconnect signal

Setting an alarm tone for reconnecting

Set an alarm tone to automatically reconnect calls which are
disconnected due to the signal strength, etc.
The amount of time that can elapse to reconnect varies depending on the
signal strength. The estimated time is approximately 10 seconds.
The other party hears no sound until the call is reconnected (up to
approximately 10 seconds). Charges are incurred for this duration.
1
In the Custom menu, select [Settings]/[Phone
settings]/[In-call settings]/[Reconnect signal].
2
Select an alarm tone/t.
Noise reduction
Reducing surrounding noise to make
voice clear
It is recommended that this function be kept set to [ON].
1
In the Custom menu, select [Settings]/[Phone
settings]/[In-call settings]/[Noise reduction]/[ON].
Noise reduction processes sound to make conversations clearer.
Sound quality may vary depending on the surrounding noise and the
tone of the voice.
In-car hands-free

Talking hands-free while driving

Connect the In-Car Hands-Free Kit 01 (sold separately) or
hands-free devices such as car navigation to the FOMA terminal,
and make/receive voice calls from the device.
Refer to the user's guide of each product for details on hands-free
devices.
Use a FOMA In-Car Hands-Free Cable 01 (sold separately) for the
In-Car Hands-Free Kit 01.
Functions such as display settings, ring tones and Public mode (Drive
mode) call functions follow the FOMA terminal settings for incoming
calls.
If a hands-free device has sound enabled, the device plays a ring tone
even when the FOMA terminal is set to the Manner mode or [Silent].
When the FOMA terminal sound is enabled, Set when closed is
followed if the handset is closed during a call. If the device sound is
enabled, the call continues when the FOMA terminal is closed
regardless of Set when closed.
Record message settings are followed even when the handset is
connected to the device.
Some handset functions may not be available depending on the device
characteristics and specifications.

Receiving a voice/Videophone call

When receiving a call, verify it using the ring tone, called LED,
vibrator, and others.
1
When a call is received, the ring tone sounds and the
called LED flashes.
: [Calling]/[Incoming videophone] appears while receiving a call.
: When a caller ID is sent, the phone number appears. If the other
party's name and phone number are saved in the phonebook, they
appear on the screen. When Picture call is saved in the phonebook,
the image appears on the screen.
: When the caller does not send a caller ID, a non-disclosure reason
message appears.
• [User unset]: When the caller purposely withholds caller ID
• [Payphone]: When the call is received from a payphone
Continued on next page
63