Using I-Appli Call; Setting I-Appli Call - Docomo SH-05A Instruction Manual

Using i-appli call

Sending and calling
<Call>
Call the other party by the operation from i-appli.
Operation methods differ with each i-appli software application.
Receiving
<Receive>
When the call is performed, i-appli call is received. If the call is answered,
the corresponding i-appli is automatically activated.
The call may be performed from the IP (Information Provider).
1
After reception, the confirmation screen to accept
i-appli call appears and the mail ring tone sounds
([a] appears).
: If no operations are performed within approximately 15 seconds in
the confirmation screen to accept i-appli call, or i-appli call is
received while other functions are being activated, [a] and the
stock icon [a] (New i-appli call) appear in stand-by display. The
call is saved as [On hold] in i-appli call histories.
2
Select [Accept]/t.
: To reject i-appli call: Select [Reject]/t.
: To hold i-appli call: Select [Hold]/t.
3
i-appli automatically starts.
: When there is no corresponding i-appli, the confirmation screen
asking whether to download. Select [Yes] to download.
If [Hold] is selected, the call can be answered from i-appli call histories
before the expiration date.
Some i-appli are automatically activated without displaying the
confirmation screen to accept depending on i-appli call.
Actions for incoming calls (ring tone, vibrator, and LED) while receiving
i-appli call follow the settings for SMS.
Packet transmission charges may apply when i-appli call is answered.
Checking history
<i-appli call logs>
Save up to 30 most recent histories.
1
In the Custom menu, select [i-appli]/[i-appli call
logs].
: When the stock icon [a] (New i-appli call) appears: In stand-by,
press t/select the stock icon [a] (New i-appli call)/t.
: To accept i-appli call: Select a history on hold/t/[Accept]/t.
: To delete one history: Select a history/i/[Yes]/t.
: To delete all histories: Press C/[Yes]/t.
In the following cases, calls are not saved in i-appli call history.
When i-appli call setting is set to [No] in Set software use of the
corresponding i-appli
When there is no i-appli and i-appli call DL setting is set to [Reject]
Reset settings deletes i-appli call histories.

Setting i-appli call

Refer to "Mobile Phone User's Guide [i-mode] FOMA version" for details
on rejecting all i-appli calls.
Setting whether to reject download from i-appli
call
<i-appli call DL>
1
In the Custom menu, select [i-appli]/[i-appli
setting]/[i-appli call DL].
2
Select the setting/t.
273