Docomo SH-05A Instruction Manual page 261

/[Reg i-appli dict]/select the setting/t
Set i-appli started with [i-appli Dictionary] of Quick search.
[About i-appli]
Check trademark of i-appli.
[Software info]
The information that appears in the description includes the software
name, version, software by, storage, profile version, compatible
models, SSL/TLS connection, and others.
The displayed software name of i-appli cannot be changed.
[Delete]
"iD appli" cannot be deleted.
If the software is set to various functions in Stand-by display or Quick
search appli, etc., a confirmation screen asking whether to delete
appears. Select [Yes] to delete.
When deleting mail-type i-appli, select whether to simultaneously
delete automatically created mail folders. If the folder contains
protected mails, the folder cannot be deleted.
When i-appli used data of the software to be deleted is saved to the
microSD Card, select whether to delete the i-appli used data
simultaneously.
When mail-type i-appli is deleted and only the folder remains, select a
folder and press C in Inbox, Outbox or Unsent messages and select
[View i-mode mail] to check the i-mode mail in the folder. View the
i-mode mail in the folder without starting the mail-type i-appli.
For some Osaifu-Keitai compatible i-appli, the software must be started
and the data on the IC card must be deleted in order to delete the
software itself.
Some Osaifu-Keitai compatible i-appli may not be deleted.
While IC card lock is set, Osaifu-Keitai compatible i-appli may not be
deleted.
If all software including mail-type i-appli is deleted when there is
protected i-mode mail in the mail folders, the folders cannot be deleted.
[Stand-by NW set]
Only software set as stand-by display can be set.
[Quick search appli]
If [Register] is selected, the message stating that some i-appli may not
work properly appears. Select [Agree].
Setting i-appli
■ Adjusting volume
<i-appli volume>
1
In the Custom menu, select [i-appli]/[i-appli
setting]/[i-appli volume].
2
Adjust the volume with u/t.
Some i-appli do not have sound.
Setting Power saver of i-appli
■
1
In the Custom menu, select [i-appli]/[i-appli
setting]/[Power saver set]/[ON].
2
Select the time before activating the Power saver
mode/t.
When the display turns off according to Light/Power saver (nP. 95)
while i-appli is running, the i-appli is paused after the set time passes,
and the battery power can be conserved.
While the following operations are performed, the Power saver mode of
i-appli is not activated. After the operations end and the set time
passes, the Power saver mode of i-appli is activated.
Packet transmission from i-appli
Access from i-appli to the microSD Card
To resume the software in the Power saver mode of i-appli, press a key
and select [Agree] in the confirmation screen.
In i-appli stand-by, activate i-appli so that it is run in the Power saver
mode.
<Power saver set>
259