Detaching The Tray From The Mainframe; Rear Fence Hp Sensor - Ricoh B089 Service Manual

3. REPLACEMENT AND ADJUSTMENT

3.1 DETACHING THE TRAY FROM THE MAINFRAME

While pressing the stopper attached to the
guide rail, pull out the large capacity tray.
NOTE: When reinstalling the tray, set the
tray on the guide rail and carefully
push the tray in, making sure to keep
the tray level.

3.2 REAR FENCE HP SENSOR

LT
1. Pull out the large capacity tray.
2. Remove the left tray rear side fence [A] (2 screws).
3. Remove the rear fence bracket [B] (1 screw).
4. Remove the connector of the rear fence HP sensor.
5. Replace the rear fence HP sensor [C] (1 screw).
NOTE: When securing the sensor in place, be sure to fasten the screw in the
proper position.
SM
DETACHING THE TRAY FROM THE MAINFRAME
[A]
A4
[C] [B]
B391R102.WMF
9-11
B391R101.WMF
[A]
A862/B391