Paper Size Sensor Board - Ricoh B089 Service Manual

PAPER SIZE SENSOR BOARD

3.2 PAPER SIZE SENSOR BOARD
[B]
1. Remove the rear cover [A] (2 screws).
2. Remove the by-pass tray [B] (1 connector, 2 release levers [C]).
3. Remove the lever [D] (1 snap ring, 1 pin).
4. While pushing the release lever [E], remove the paper tray [F].
5. Remove the by-pass width sensor [G].
NOTE: When installing the by-pass width sensor [G], move the side fence inward
all the way so that the seal on the side face gear faces the surface with the
seal [H] on the by-pass width sensor.
A899/B415
[C]
B415R502.WMF
[G]
[D]
14-6
[A]
[H]
B415R503.WMF
[F]
[E]
SM