Ricoh B089 Service Manual page 264

SERVICE PROGRAM MODE
5841 Supply Name Setting
Allows setting the following items with the Soft Keyboard after pressing the "Soft
Keyboard" button displayed for this SP code. The items you enter are displayed
after pressing "User Tools" and then pressing the "Inquiry" button on the touch-
panel display. The items stored in SP 5841-12, 13, and 14 do not appear on the
Inquiry screen.
5841 1 Toner Name Setting: Black
5841 5 Staple Std
5841 7 Org Stamp
5841 11 Staple Std 1
5841 12 Staple Std 2
5841 13 Staple Std 3
5841 14 Staple Std 4
5842 Net File Analysis Mode Setting
Selects each debug output mode for NetFile processing
Bit 8 is reserved. Bit 7 is the debug output switch for each mode.
Net files are jobs to be printed from the document server using a PC and the
DeskTopBinder software
5844 USB
5844 1 Transfer Rate
Sets the speed for USB data transmission.
0x01: Full Speed (12 Mbps fixed)
0x04: High Speed/Full Speed (480 Mbps/12 Mbps auto adjust)
5844 2 Vendor ID
Sets the vendor ID: Initial Setting: 0x05A Ricoh Company.
5844 3 Product ID
Sets the product ID.
5844 4 Device Release Number
Sets the device release number of the BCD (binary coded decimal) display.
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
B089/B093
Enter the name of the toner in use.
Enter the name of the staples in use for normal
stapling (not booklet stapling)
Enter the name of the original stamp that is
installed in the document feeder. (This is stamped
on originals to indicate that they have scanned.)
Enter the names of the staples used in the
finisher.
[8 bits / 0011 1111 / Bit SW]
[0x01~0x04 / 0x04 / 0]
[0x0000~0xFFFF/ 0x05CA /1], DFU
[0x0000~0xFFFF/0x0403/1], DFU
[0000~9999/0100/1], DFU
4-48 SM