Ieee 1394 Interface Kit (G) - Ricoh B089 Service Manual

3.20.6 IEEE 1394 INTERFACE KIT (G336)
Accessories
Check the accessories and their quantities against the following list:
Description
1. IEEE 1394 Board .................................................................1
2. 6-pin/6-pin Cable .................................................................1
3. 6-pin/4-pin Cable .................................................................1
4. Screws.................................................................................2
[B]

CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install this option, the Printer/Scanner Option must be installed first.
("3.20.2) Only one slot is available for the interface option. You can install
only one printer interface option at a time: File Format Converter (B519),
IEEE 1394 (G336), IEEE 802.11b (B515), USB 2.0 (B525-01), or Bluetooth
(G354).
1. Remove the machine rear, controller board cover, and middle knockout.
("3.20.1)
2. Remove the slot cover [A] ( x 2).
3. Attach the IEEE 1394 board [B] to the controller board.
NOTE: Make sure that the jumper on the board is set to TB2.
4. Fasten the board with the screws [C] ( x 2).
5. Use the appropriate cable provided to connect the machine to the computer.
SM
[A]
3-67
OPTIONAL BOARDS AND DIMMS
Q'ty
[C]
B577R102.WMF
B089/B093