Ricoh B089 Service Manual page 263

5840 IEEE 802.11b
5840 4 SSID
Enters a unique ID (up to 32 characters long) to identify the device when it is
operating in an area with another wireless LAN network.
5840 6 Channel MAX
Sets the maximum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the maximum end of the range for each area. Adjust
the upper 4 bits to set the maximum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
5840 7 Channel MIN
Sets the minimum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the minimum end of the range for each area. Adjust the
lower 4 bits to set the minimum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
5840 11 WEP Key Select
Selects the WEP key. [00~11 / 00 / 1 binary]
5840 18* SSID Key Check
Execute to determine whether the value entered for the SSID setting is correct. If
the execution returns "2" the setting is correct. If the returned value is "3", the
setting is not correct.
5840 20 WEP Mode
Determines the operation mode of the WEP key.
Displayed only when the option 801.11b for wireless LAN is installed.
SM
Enter ID
JA [1~14/ 14 / 1]
NA [1~11 / 11 / 1
EU [1~13 / 13 / 1]
China, Taiwan (Same as NA)
JA [1~14 / 1 / 1]
NA [1~11 / 1 / 1
EU [1~13 / 1 / 1]
China, Taiwan (Same as NA)
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
0: Max. 64-bit (10 characters)
1: Max. 128-bit (10, 26 characters)
4-47
SERVICE PROGRAM MODE
B089/B093