Smc Data Lists (Sp); Memory All Clear (Sp) - Ricoh B089 Service Manual

4.2.6 SMC DATA LISTS (SP5990)
1. Open SP mode 5990 and select the number corresponding to the list that you
wish to print.
SMC (System Parameter and Data Lists)
All Data List
1
2 SP Mode Data List
3 UP Mode Data List
4 Logging Data List
5 Self-Diagnostics Results List
7 NIB Summary
8 Capture Log
21 Copy UP Mode List
22 Scanner SP Mode List
23 Scanner UP Mode List
2. Touch "Execute" on the touch panel
3. Select. "Single Face" or "Both Face" then touch "Execute" to start printing.
4. After printing the list, press Exit twice to close the SP Mode screen and return
to copy mode.
4.2.7 MEMORY ALL CLEAR (SP5801)
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP70021: Electrical total counter value
SP58111: Machine serial number
SP5907: Plug & Play Brand Name and Production Name Setting
Normally, this SP mode should not be used. This procedure is necessary only after
replacing the NVRAM, or when the copier malfunctions because the NVRAM is
damaged.
Using a Flash Memory Card
1. Upload the NVRAM data to a flash memory card (! NVRAM Data Upload).
2. Print out all SMC data lists (SP mode 5990).
NOTE: Be sure to print out all the lists. If the NVRAM data upload was not
completed, it is necessary to change the SP mode settings by hand.
3. Open SP mode 5801.
SM
SERVICE PROGRAM MODE
4-109 B089/B093