Ricoh B089 Service Manual page 741

Code Meaning
15-64 TIFF Decompression
Error
15-71 Not Binary Image Data
15-73 MDN Status Error
15-74 MSDN Message ID
Error
15-80 Mail Job Task Read
Error
15-81 Repeated Destination
Registration Error
15-91 Send Registration Error Could not receive the file for transfer
15-92 Memory Overflow
15-93 Memory Access Error
15-94 Incorrect ID Code
15-95 Transfer Station
Function
SM
ERROR CODES FOR LAN COMMUNICATION
Cause
The file received as an attachment
caused the TIFF decompression
error:
• The TIFF format of the attachment
is corrupted.
• Software error.
The file could not be received
because the attachment was not
binary image data.
Could not find the Disposition line in
the header of the Return Receipt, or
there is a problem with the firmware.
Could not find the Original Message
ID line in the header of the Return
Receipt, or there is a problem with
the firmware.
Could not receive the transmission
because the destination buffer is full
and the destination could not be
created (this error may occur when
receiving a transfer request or a
request for notification of reception).
Could not repeat receive the
transmission because the destination
buffer is full and the destination could
not be created (this error may occur
when receiving a transfer request or
a request for notification of
reception).
to the final destination:
• The format of the final destination
or the transfer destination is
incorrect.
• Destinations are full so the final
and transfer destinations could not
be created.
Transmission could not be received
because memory overflowed during
the transaction.
Transaction could not complete due
to a malfunction of SAF memory.
The machine rejected an incoming e-
mail for transfer request, because the
ID code in the incoming e-mail did
not match the ID code registered in
the machine.
The machine rejected an incoming e-
mail for transfer because the transfer
function was unavailable.
2-5
Action
• Ask the sender to check that
the attachment was sent in
correct TIFF format.
• If the problem persists, update
the software.
Ask the sender to check the
content of the attachment.
Ask the sender to resend the
mail. If the problem persists,
update the firmware.
Ask the sender to resend the
mail. If the problem persists,
update the firmware.
No action required. When
destinations are used and a
space opens in the buffer, the
transmission will be received.
No action required. When
destinations are used and a
space opens in the buffer, the
transmission will be received.
• As the send to check both the
transfer destination and the
final destination.
• When destinations open, the
transmission will be received.
• Expand SAF memory.
• Ask the sender to break up the
file and send the parts
separately.
Initialize memory. If the problem
persists, replace the MBU.
• Ask the sender to correct the
ID code.
• Set IFAX SW03 Bit 3 to "1".
Inform the transfer requester that
this machine does not support the
transfer station function.
IFAX