Ricoh B089 Service Manual page 652

BIT SWITCHES
System Switch 02
No FUNCTION
0-1 Not used
Bit 1
Bit 2: Not used.
2 Communication stall fail safe.
0: Disabled
1: Enabled
3 Not used.
4 File retention time
0: Depends on User Parameter
24 [18(H)]
1: No limit
5 Not used
6
Memory read/write by RDS
to Bit 7 6
7 0 0
0 1
1 0
1 1
System Switch 03
No FUNCTION
0 Length of time that RDS is
to temporarily switched on when
7 bits 6 and 7 of System Switch
02 are set to "User selectable"
System Switch 04
No FUNCTION
0 Program registration list output
key display selection
1-2 Not used
3
Printing dedicated tx
parameters on Quick/Speed
Dial Lists
0: Disabled
1: Enabled
4-7 Not used
B576
Do not change the settings.
If enabled, the machine cuts communication within
one hour of a communication error but the
connection remains established.
Do not change the setting.
1: A file that had a communication error will not be
erased unless the communication is successful.
Do not change the setting.
(0,0): All RDS systems are always locked out.
Setting (0,1), (1,0): Normally, RDS systems are locked out,
Always disabled but the user can temporarily switch RDS on to allow
User selectable RDS operations to take place. RDS will
User selectable automatically be locked out again after a certain
Always enabled time, which is stored in System Switch 03. Note that
if an RDS operation takes place, RDS will not switch
off until this time limit has expired.
(1,1): At any time, an RDS system can access the
machine.
00 - 99 hours (BCD).
This setting is only valid if bits 6 and 7 of System
Switch 02 are set to "User selectable".
The default setting is 24 hours.
This setting determines whether the key to print the
program registration list is displayed on the screen.
Do not change the settings.
1: Each Quick/Speed dial number on the list is
printed with the dedicated tx parameters (10 bytes
each).
The first 10 bytes of data are the programmed
dedicated tx parameters; 34 bytes of data are
printed (the other 24 bytes have no use for service
technicians).
Do not change the settings.
COMMENTS
COMMENTS
COMMENTS
3-12
SP No. 1-101-003
SP No. 1-101-004
SP No. 1-101-005
SM