Paper End Sensor Replacement; Vertical Transport Sensor Replacement - Ricoh B089 Service Manual

PAPER END SENSOR REPLACEMENT

3.8 PAPER END SENSOR REPLACEMENT
[C]
[B]
[A]
B390R106.WMF
1. Remove the paper tray.
2. Remove the paper end sensor bracket [A] (1 screw and 1 connector).
3. Replace the paper end sensor [B].
NOTE: After replacing the sensor, pull the sensor cable towards the right side of
the frame [C] so that it does not touch the paper in the tray.

3.9 VERTICAL TRANSPORT SENSOR REPLACEMENT

[C]
[D]
[B]
[A]
B390R105.WMF
1. Open the right door [A].
2. Remove the right guide plate [B] (2 screws).
3. Remove the vertical transport sensor bracket [C] (1 screw and 1 connector).
4. Replace the vertical transport sensor [D].
A860/B390 8-20 SM