Ricoh B089 Service Manual page 764

INTERNET MAIL COMMUNICATION
How to Set Up Mail Delivery
The sender must set the mail address in the following format:
1) When dialing using a fax number
fax=<Delivery Destination Fax Number>@<IFAX Host Name>.<Domain Name>
Example:
fax=0454771459@cl01.dom1g.ricoh.
co.jp
2) When dialing using a Quick dial destination
fax=<# Quick Dial Number>@<IFAX Host Name>.<Domain Name>
Example:
fax=#001@cl01.dom1g.ricoh.co.jp
3) When dialing using a Group destination
fax=<#**Group Dial Number>@<IFAX Host Name>.<Domain Name>
Example:
fax=#**05@cl01.dom1g.ricoh.co.jp
Mail Delivery Conditions
1) The machine must be set up for SMTP mail delivery:
User Tools> Facsimile Features> E-mail Settings> SMTP RX File Delivery
Settings
2) If the user wishes to limit this feature so that the machine will only deliver
mail from designated senders, the machine's "Auth. E-mail RX" feature must
be selected (User Tools> Facsimile Features> E-mail Settings> SMTP RX
File Delivery Settings).
3) If the "SMTP RX File Delivery Setting" is set to 0 to prohibit SMTP receiving,
and if there is mail designated for delivery, then the machine responds with
an error. (User Tools> Facsimile Features> E-mail Settings> SMTP RX File
Delivery Settings)
4) The "fax=" setting does not distinguish between upper and lower case
letters.
5) More than one destination cannot be specified in the mail address. A Group
counts as 1 destination.
6) If the quick dial, speed dial, or group dial entry is incorrect, the mail
transmission is lost, and the IFAX issues an error to the SMTP server and
outputs an error report.
IFAX
! Delivers to fax number 0454771459
! Delivers to the number registered for Quick
Dial key 001.
! Delivers to numbers registered for Group
dial key 05.
4-10 SM