Ricoh B089 Service Manual page 270

SERVICE PROGRAM MODE
5860
5860 20
5860 21
5860 22
⇒
5870
⇒
5871
⇒
5872
5907*
5908*
B089/B093
SMTP/POP3/IMAP4
Partial Mail Receive Timeout
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is
not received during this prescribed time.
MDN Response RFC2298 Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No compliance.
1: Compliance. The MAIL FROM (SMTP command) is sent open (< >).
SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is authorized.
Common Key Info Writing
Writes to flash ROM the common proof for validating the device for NRS
specifications.
HDD Function Disable DFU
Disables the HDD functions by suppressing all functions that write data to the
HDD. After this SP is executed, the machine must be switched off and on to
enable the setting.
Note: This SP is intended for use during the installation of the security DIMM,
an option that is not yet available.
HDD Overwrite Status Check
DFU
Plug & Play Setting
Sets the brand name and the production name for Windows Plug & Play. This
information is stored in NVRAM. If the NVRAM is defective or has been replaced,
these names should be registered again.
Allows input of the maker and model on a two-line display. After replacing the
NVRAM, the settings can be selected from available maker and model names.
To select and enable the maker & model name:
1 Press and hold down
2 Enter the number that corresponds to the correct name on the list.
LCT Paper Size
Selects the paper size for the LCT. Use this SP after changing the paper size in
the optional LCT (i.e., after changing the side plate position for the LCT).
[0~1 / 1 / 1] North America
0: A4
1: LT
[0~1 / 0 / 1] Other Areas (Europe/Asia)
0: A4
1: LT
[1~168 / 72 / 1]
[0~1 / 0 /1]
[0~1 / 1 / 1]
[0~1 / 0 / 1] (0: OFF, 1: ON)
.
4-54
Rev. 06/2004
SM