Print Service Table - Ricoh B089 Service Manual

5846 UCS Settings
UCS (User Control Service) is the software that manages user codes, the fax
address book, the scan-to-email address book, and the scan-to-folder address
book.
5846 50* Initialize All Directory Info.
5871 HDD Function Disable
Disables the HDD functions by suppressing all functions that write data to the
HDD. After this SP is executed, the machine must be switched off and on to
enable the setting. This SP is used after the optional Security Module Type A
has been installed on the machine. For more details about this installation, see
"1. Installation".
5872 HDD Overwrite Status Check
Determines whether the content of the hard disk has been overwritten.
Range: 0 to 65535
5967* Copy Server Set Function
Allows or denies access to the document server screen. After changing this
setting, you must switch the main switch off and on to enable the new setting.
0: Function enable. Pressing the Document Server button opens the
Document Server screen.
1: Function disable. Pressing the Document Server button does not display
the Document Server screen. Free access to the document server is denied.
However, files on the document server can still be accessed with the printer
driver.
5990 SP Print Mode (SMC Printout)
5990 1 All (Data List)
5990 2 SP (Mode Data List)
5990 3 User Program
5990 5 Diagnostic Report

5.2 PRINT SERVICE TABLE

1006 001 Sample/Locked Print
[0~1/0/1] 0: Linked, 1: On
Enables and disables the document server. When you select "0", the
document server is enabled according to the Copy Service Mode SP5967. If
you select "1", the document server is enabled regardless of Copy Service
Mode SP5967.
Note: Set to "1" (On) for use of the Sample Copy and Locked Print features.
SM
Clears all directory information managed by UCS,
including all user codes
[0~1 / 0 / 1] (0: OFF, 1: ON)
Execute to print a list of the settings for the selected
item.
15
PRINT SERVICE TABLE
B692/B694