Ricoh B089 Service Manual page 770

INTERNET MAIL COMMUNICATION
The fields of the e-mail and their contents are as follows:
Field
From
To
Bcc
Subject
Content-Type
Content-Transfer-Encoding
Mail body (text part)
Message body
Request by G3 Fax
IFAX
Requesting
Term inal
E-mail End
Receivers
The procedures are the same as for a normal G3 fax machine.
The requesting terminal dials the Transfer Station, and requests it to transfer the
message to end receivers stored as quick dials, speed dials, and group dials in the
Transfer Station.
The machine uses NSF to send an ID code and the machine telephone number.
Up to 30 end receivers can be requested.
End receiver destinations can also be selected using tone signals, in the same way
as for other recent fax models. An e-mail address can also be selected in this way,
as end receivers and as the destinations for receiving the transfer result report.
The receiving IFAX machine receives the transfer request on the PSTN
connection. It then handles the transfer request in the same way as explained in
"Request by Mail'.
IFAX
E-mail address of the requesting terminal
Destination address (Transfer Station address)
Backup mail address
From TSI (Fax Message No. xxxx)
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Base 64, 7-Bit, 8-bit, Quoted Printable
RELAY-ID-: xxxx (xxxx: 4 digits for an ID code)
RELAY: #01#*X#**01....
MIME-converted TIFF-F.
G 3 Transmission (Transfer Request)
G 3 Transmission (Report)
SMT P
Server
Content
PSTN
E-mail
LAN
4-16
G3 End Receivers
Transfer
IFAX
Station
IFAXD915.WMF
SM