Before You Begin; Seal Check And Removal - Ricoh B089 Service Manual

BEFORE YOU BEGIN

1.2 BEFORE YOU BEGIN

1.2.1 SEAL CHECK AND REMOVAL

[A]

CAUTION
Before you start the installation, you must check the box seals to confirm
that they have not been removed since the items were sealed in the box at
the factory.
1. Check the box seals [A] on each corner of the box.
• Confirm that a tape is attached to each corner.
• The surfaces of the tapes should be blank. If you see "VOID" on the tapes
STOP, do not install the components, contact your superviser.
2. If the surfaces of the tapes are unmarked, remove from the corners of the box.
3. As you remove each seal, the "VOID" marks [B] appear. This prevents the tape
from being reattached to the box.
4. Make sure that you have the correct security module for the machine. The
machine model requires either the DIMM type or the SD Card type.
Model
B135/B138 e/f
B089/B093
B147/B149
B692/B694
B692I901.WMF
Security Module Required
DOS Unit Type A (DIMM)
DOS Unit Type A (DIMM)
DOS Unit Type B (SD Card)
2
B692I903.WMF
[B]
SM