Cp Commands And Options - IBM Professional Series User Manual

CP Commands and Options
*
#CP
Use the asterisk
(*)
to annotate the terminal display screen
data with a comment. The format of the
*
(comment)
command is:
I
anycomment
Use the #CP command to execute a CP command while in a
virtual machine command environment without first signaling
attention to get to the CP command environment. The
format of the #CP command is:
#CP
[commandlinel [#commandline2 # ... ]]
Where:
commandline
specifies the name and operands for the CP
command or commands you want to issue. You must
precede the first commandline with at least one
blank.
Usage Notes:
1. The pound sign (#) shown in the preceding format
represents the logical line end symbol and is the default
supplied by VM/PC. However, you may choose to
redefine the logicallinend symbol.
If
you have redefined
the logical line end symbol, #CP is an invalid command;
you must substitute your line end symbol for the pound
sign when using this command.
2. For the command to operate, the following conditions
must be met:
7 -10
VM/PC Users Guide