IBM Professional Series User Manual page 30

If,
instead of the awaited screen, you see the following
screen:
IBM VM/PC INSTALLATION
INSTRUCTIONS FOR EXISTING FILES
Your C disk already has one or more files with the same name as a file
needed during VM/PC installation.
The next screen you will be shown is a list of the EXISTING file(s) that
you may wish to SAVE.
For each EXISTING FILE, you will have to choose one of three actions:
SAVE the file - a new file with same name will NOT be installed.
RENAME the file - the EXISTING file wi 11 be given a new name (which
you supply), and a new file will be installed.
REPLACE the file - a new file with same name WILL be installed.
You will also be given a chance to QUIT (if you need to study your
choices).
To see the list, press ENTER.
then you will need to make some choices about files
already on your C disk. This DOES NOT MEAN
anything has gone wrong. The installation program will
help you with your choices, but you will have to refer to
the "What About Existing Files?" section of this chapter
for the instructions you need.
• STEP 4. Press ENTER.
After pressing ENTER, you will see the names of the
temporary files as they are copied to your C disk. Next,
the following screen will appear:
Chapter 2. Installing VM/PC 2-7