Establishing Automatic Links And Accesses; Sharing Data And Programs With Other Users - IBM Professional Series User Manual

&TRACE OFF
RELEASE 271 (DET
CP LINK
*
191 271 MW
ACCESS 271 R
&EXIT
&TRACE OFF
RELEASE 271 (DET
CP LINK
*
191 271 RR
ACCESS 271 R
&EXIT
Once you have filed away UPLOAD EXEC and
DOWNLOAD EXEC, UPLOAD and DOWNLOAD
become part of CMS's command vocabulary. When you
type either word, CMS will carry out the commands
contained in the designated EXEC file just as though you
had typed them on your terminal.
Establishing Automatic LINKs and
ACCESSes.
While we're on the subject of EXECs, CMS uses a special
EXEC called PROFILE that it runs automatically every time
you IPL CMS. One way you can use this feature is to store
the LINK and ACCESS commands that establish the data
sharing relationships you most often use in the PROFILE
EXEC. You can also store other favorite commands in your
PROFILE, so that you can be sure that they will be executed
each time you begin a CMS session. And if, during a
session, you discover that you have somehow lost a LINK or
an ACCESS, typing "PROFILE" may add back the "lost"
minidisk.
Note: Remember that if you have LINK and ACCESS
commands for a remote system in a PROFILE EXEC, you
must ensure that VMPCSERV has been started in the
remote system before the PROFILE EXEC is executed.
Sharing Data and Programs with Other Users
Before long, you may find it useful to be able to share data
and programs with other users. As you saw earlier in the
section on establishing a concurrent session with your remote
virtual machine, VM/PC allows you to LINK and ACCESS
data and programs associated with other remote virtual
5-48 VM/PC Users Guide