Listfile - IBM Professional Series User Manual

INclude
loader and the handling of unresolved references, see the
description of the LOAD command. The format of the
INCLUDE command is:
fn ... [(options ... [)]]
options:
[~~~~~ARJ[RESET ~e~trY~J[ORIGIN {~~~~~c~J
[~~~APJ [~~~~PE
]
[~NV
]
[~~~EP
]
[~gX~TO
]
[
wg ] [START] [SAME]
[12.Yf
][RLDSAVE]
NOLIBE NODUP
The RLDSA VE option controls whether the CMS loader
saves relocation information in an internal buffer as the text
files are loaded. If this information is saved, the GENMOD
command will append it to the CMS module when it is
created. This information is used by the NUCXLOAD
command, if the module is loaded as a nucleus extension, to
relocate the module to the area where it has been loaded.
For a complete description of the INCLUDE command,
refer to VMjSP CMS Command and Macro Reference.
LISTFILE
Use the LISTFILE command to obtain specified information
about CMS files residing on accessed disks. The format of
the LISTFILE command is:
Listfile
options:
fHeader
J
LNOHeader
[
EXeC[TraCe]
[ARGS~ ~FName~
Trace [ARGS] FType
APpend [ARGS] FMode
STACK [FIFOILIFO] FOrmat
FIFO ALloc
LIFO Date
XEDIT Label
[Blocks]
[ %x ]
For a complete description of the LISTFILE command, refer
to the VMjSP CMS Command and Macro Reference.
7-98 VM/PC Users Guide