Display - IBM Professional Series User Manual

Where:
dvcadr [dvcadr ... ]
dvcadrl-dvcadr2
dvcadr is the address of the device to be removed
from the virtual machine configuration. To detach
multiple devices, a blank is used to separate the
device addresses. To detach a range of devices, a
hyphen must be inserted between the addresses
specified. Multiple addresses and a range of
addresses cannot be intermixed on the same
command line.
Usage Notes:
1. You can detach a device that was temporarily defined by
the DEFINE command, or one that is part of your
permanent virtual machine configuration, except for the
terminal or printer devices.
2. You can detach a device even if it is currently in use.
Response:
DISPLAY
DEV dvcadr DETACHED
This response will not appear if you have issued the
CP SET IMSG OFF command.
Use the DISPLAY command to display the following virtual
machine components. The format of the DISPLAY
command is:
Chapter 7. VM/PC Commands 7 -19