IBM Professional Series User Manual page 153

You install the remote server in three parts:
You load the HEXIN program in source code form using
the EDIT command on your remote VM system,
assemble it, and the HEXIN module is then created.
You load the TEXT files needed to generate the
VMPCSERV module to your remote system using the
HEXIN module.
You use these TEXT files to create the VMPCSERV
module, and Upload the VMPCSERV exec using the
EDIT command on your remote VM system.
You will need approximately 200 blocks of space on your
Remote System's A-disk to Upload the Remote Server files
(if your A-disk is formatted in 1024-byte blocks).
The remote server program is contained on distribution
diskette 3. Follow these steps to install it:
Step 1 - Bring up VM/PC (it is assumed that you have
already installed VM/PC; if not, refer to Chapter 2 for
that procedure).
• Step 2 - From the Session Selection Menu, select the
Remote 3277 Session.
• Step 3 - Logon to your remote VM system, IPL CMS,
and enter the following commands (they may be
executed from an EXEC if you prefer):
GLOBAL MACLIB DMSSP CMSLIB (or the
maclib names on your remote system which contain
the CMS macros)
CP SET MSG OFF
CP SET WNG OFF
CP SET ACNT OFF
CP TERMINAL ESCAPE OFF LINEND OFF
LINEDEL OFF LINE SIZE 80
6-4
VM/PC Users
Guide