IBM Professional Series User Manual page 326

STORE REGISTER EXCEEDS MAXIMUM VALUE
(DMK163E)
You entered more data to be consecutively stored in
either general or floating-point registers than there are
registers for that data.
T
TERMINAL ASYNCHRONOUS INTERRUPT WAS NOT
ATTENTION (DMK002T)
An asynchronous interrupt from the simulated 3277 for
the Local Session was presented and the status
associated with that interrupt was not attention.
The following names are undefined: (DMS201 W)
A list of names of unresolved external references is
displayed. You may obtain access to the specified files
by issuing the appropriate INCLUDE command, or
ignore the warning message if the modules are not
needed for correct execution of your program.
The remote server has been restarted. Connection to remote
disks has been lost. (DMS805E)
VM/PC detected that the remote server has been
stopped and restarted. You must re-establish the
connection to remote minidisks by issuing the
appropriate LINK and ACCESS commands for those
minidisks.
The remote server is not available. Connection to remote disks
has been lost. (DMS801E)
The communication with the remote server program has
been stopped. You must re-start the remote
VMPCSERV program to re-establish communications
with the remote server, and issue the appropriate LINK
and ACCESS commands to establish your remote
minidisks.
The xx disk does not exist. Disk yyy accessed as mode z.
(SERV)
As the VMPCSERV program terminates and tries to
restore the CMS environment which existed prior to your
using the remote server program, an error occurred as
Chapter 8. VM/PC Messages 8-23