Printing Files; Print Command; Remote Printing - IBM Professional Series User Manual

Printing Files
When you want one of your files printed, you can use the
PRINT command.
You can print any screen displayed on your terminal by
pressing the uppercase key and the RESET (PrtSc) key. The
screen will be printed on your Personal Computer printer.
Note: You can stop any printing that's in progress by issuing
the command:
PURGE PRINT ACTIVE
This cancels only the current printing. To cancel all printing
you've asked for, issue the command:
PURGE PRINT ALL
(You can also cancel a specific print by specifying the print
number (nnn) instead of ALL.)
PRINT Command
You can type the PRINT command either on the command
line or on a FILELIST screen. Its format is:
PRint filename filetype filemode
You must specify at least the PR of PRINT. You also must
specify the filename and filetype. If you don't specify a
filemode, VMjPC will assume the filemode is A. See
"PRINT" on page 7-104 for further information about
options you may specify.
See "An EXEC to Print a File" on page 5-40 for an example
of using EXECs to make your printing easier.
Remote Printing
If you are using a Remote Session, you can use any Printing
method available to the Remote System. The DCF Program
Product, often referred to simply as SCRIPT, is an example
of something that might be available on a Remote System.
5-38
VMjPC Users
Guide